No products in the cart.
What if screws or parts are missing?
Before you assume a shortage, open your model PDF and count every lettered board and P-coded post against the parts list. Hardware rows often print +1; those extras are spares, not proof that a piece is gone. If the count still shows a real gap after you finish the list, request replacements through Parts, or contact us for further help as the General Guidelines allow.
Updated 2 September 2026. Written by Globlazer Assembly Support.
Fits / Not Fits
| Fits | Not Fits |
|---|---|
| Count-first workflow, +1 spares, then Parts / contact when the list is short | Skipping the parts list and guessing from photos alone |
| Shared advice for any Globlazer kit | Publishing one model's screw totals (for example X26+1) as a line-wide official count |
Source: official Globlazer assembly manual, lettered parts and hardware lists; General Guidelines contact note. Counts vary by model.
Quick checks
- Sort boards by letter and posts by P code before Step 1.
- Treat +1 as spare; set those aside so they do not confuse the count.
- Photograph the carton label and the short line on the list when you open a Parts request or contact us.
Next steps
- Replacement parts — request missing hardware or boards
- How to assemble a cat tree — build method after the kit is complete
- Official PDF manuals — the parts list for your model
